« POPE 5 Home | Email msg. | Reply to msg. | Post new | Board info. Previous | Home | Next

Re: Transom in the boat all put back together, just need to do some grinding and leveling then 4 layers of fiberglass and KEVLOR!!!

By: capt_nemo in POPE 5 | Recommend this post (0)
Mon, 26 Aug 19 8:35 AM | 44 view(s)
Boardmark this board | Pope 5
Msg. 38645 of 62138
(This msg. is a reply to 38643 by Decomposed)

Jump:
Jump to board:
Jump to msg. #

What else needs to be done before she can go in the water?


EVERYTHING HAAAAAAAAAAAAAA I have to frame up a new floor outside and inside. Just work I enjoy doing. I'm a carpenter remember LOL


I will frame the outside floor, sheet it then fiberglass it to the sides of the boat. Don't want any leaks into the bilge........... I will have 2 pumps in the bilge though. None in the boast right now. They didn't think about that back in 1957 ......




Avatar

Realist - Everybody in America is soft, and hates conflict. The cure for this, both in politics and social life, is the same -- hardihood. Give them raw truth.




» You can also:
- - - - -
The above is a reply to the following message:
Re: Transom in the boat all put back together, just need to do some grinding and leveling then 4 layers of fiberglass and KEVLOR!!!
By: Decomposed
in POPE 5
Mon, 26 Aug 19 8:33 AM
Msg. 38643 of 62138

Nemo:

Re: "After, photo when I am done with the transom."
She's starting to look like something that might just float. What else needs to be done before she can go in the water?


« POPE 5 Home | Email msg. | Reply to msg. | Post new | Board info. Previous | Home | Next