« F@H Home | Email msg. | Reply to msg. | Post new | Board info. Previous | Home | Next

Multiples - BAP

By: new_sun_rising in F@H | Recommend this post (0)
Thu, 28 Feb 13 3:16 AM | 36 view(s)
Boardmark this board | Folding at Home
Msg. 01920 of 02753
(This msg. is a reply to 01919 by BigApplePi)

Jump:
Jump to board:
Jump to msg. #

BAP,

I'm presuming that "one the other machine I don't get to see that" references a machine that has both GPU and SMP folding?

If that is correct - then in that middle column on the panel - one section says Folding Slots, the other says Work Queue - you can click on one or the other of the listed units and the details in that right area titled Work Unit will change to reflect the selected work unit - clicking from one to the other will switch the details from one to the other. I captured the screens as jpg's for the difference, but I don't know how to upload them here so you can see them :-(

I'm presuming that you have "Expert" selected in the upper right had corner of the F@H Client Control Panel
Sun :-)




Avatar




» You can also:
- - - - -
The above is a reply to the following message:
Re: Credits?
By: BigApplePi
in F@H
Wed, 27 Feb 13 6:23 PM
Msg. 01919 of 02753

newS. Maybe I'm not looking hard enough, but the "Work Unit" section on the right only shows details for the top running project not the other one which is an annoyance. So on one machine I see base credit of 1698 for project 7808 but I don't get to see that on the other machine. Anyway the cpu speed accounts for the credit difference.


« F@H Home | Email msg. | Reply to msg. | Post new | Board info. Previous | Home | Next