Forum Home | Log in | Signup | My Page | Rules | FAQ | Boards | Members | Search
« F@H Home | Email msg. | Reply to msg. | Post new | Board info. Previous | Home | Next

Re: I know why my output is so low

By: new_sun_rising in F@H | Recommend this post (0)
Fri, 01 Jun 12 6:32 AM | 29 view(s)
Boardmark this board | Folding at Home 		Msg. 01123 of 02753
(This msg. is a reply to 01122 by BigApplePi)
Jump:
Jump to board:
Jump to msg. #

Bap -

The code is different for bold,

Blue 
italics, or underline.

You use a bracket rather than the less than or greater than sign that you used in the post below.


Sun :-)


of course - you can also just hit the "B" over under the smiley faces on the right of this screen to turn on the bold, then type what you want in bold, then hit the "B" again. Same works with the colors, bold, or others. Bob's also lets you

highlight text - but you
can't choose a different highlight color. You also can do a 
 Pre format that makes your font smaller




Avatar


- - - - -
View Replies (2) »



» You can also:
- - - - -
The above is a reply to the following message:
Re: I know why my output is so low
By: BigApplePi in F@H
Fri, 01 Jun 12 5:52 AM 		Msg. 01122 of 02753

Am using this:
http://folding.stanford.edu/English/WinGuide
If that's not the advisory link, let me know.

That's the basic install. I took most of the defaults I believe. The results are the same as with Version 6. I choose both SMP & GPU for the install. The result is SMP folds but GPU just sits there. The good thing is FahCore_15.exe loaded instead of 11.exe so that's progress. There is much advice on the folding forum but hard to follow. All get me stuck somewhere.

(I wonder why <b>bold</b> and color fonts don't seem to work on this Atomic Bob thread?)

Here is one advice suggestion:
http://www.evga.com/forums/tm.aspx?m=1526339&;mpage=1&print=true
<b>"OK, I finally got it... here's what you do:

Must use V7 client in expert mode. Follow THESE instructions first, then...
1) Start the V7 client, pause the GPU client(s) if running.
2) go to 'Start' > 'All Programs' > 'FAHClient' > 'Data Directory' [it links directly to data location], then dbl click 'work' and delete your GPU-related directories. The directories are those with names '00', '01', etc, which match your 'Work Queue' number on the V7 client expert main page. Be sure you do not delete any CPU or non-680 directories.
3) go back to the V7 client and click 'Configure', dbl click the first 680 GPU entry (repeat for other 680's as necessary)
4) scroll down to 'Extra slot options (expert only)' and look for an Add button on the lower right and click it.
5) under 'Name:' enter "client-type" and under 'Value:' enter "beta", click OK
6) Return to main V7 screen, look under 'Folding Slots' and for each GPU right-click > 'Fold'
7) If they don't start properly just restart the folding client."</b>

I will try the above next a 2nd time. Got stuck the 1st time. Anyone wanna see my logfile? Hah!

« F@H Home | Email msg. | Reply to msg. | Post new | Board info. Previous | Home | Next